p pje5ufn10a may 8,2014-rev.00 page 1 ultra low capacitance tvs/esd protection v rwm 5 v features ? iec61000-4-2(esd): 15kv air, 8kv contact compliance ? iec61000-4-4(eft): 20a(5/50ns) ? iec61000-4-5(lightning): 2.5a(8/20 s) ? low leakage current, maximum 1 a at rated voltage ? lead free in compliance with eu rohs 2011/65/eu directive. ? green molding compound as per iec61249 std. (halogen free) mechanical data ? case: dfn2510-10l, plastic ? terminals: solderable per mil-std-750, method 2026 ? approx. weight: 0.00004 ounces, 0.0011 grams ? marking: je5u applications ? usb3.0 data line protection ? high definition multi-media interface protection ? monitors and flat panel displays notebook computers ? video line protection & base stations ? 10/100/1000 ethernet fig.175(top view) ? hdsl, idsl secondary ic side protection ? control signal lines protection parameter symbol limit units esd iec61000-4-2(air) esd iec61000-4-2(contact) v esd 15 8 kv operating junction temperature t j -55 to +125 o c storage temperature range t stg -55 to +150 o c maximum ratings (t a =25 o c unless otherwise noted)
p pje5ufn10a may 8,2014-rev.00 page 2 electrical characteristics (t a =25 o c unless otherwise noted) parameter symbol test condition min. typ. max. units reverse stand-off voltage v rwm - - - 5 v reverse breakdown voltage v br i br =1ma, between any i/o pins to gnd 6 - 9 v reverse leakage current i r v r =5v, any i/o pin to gnd - - 1 a clamping voltage v cl i pp =1a, t p =8/20 s, any i/o pin to gnd - 9.5 12 v i pp =2.5a, t p =8/20 s, any i/o pin to gnd - 11 13 clamping voltage tlp (note 1) v cl i pp =4a, t p =100ns, any i/o pin to gnd - 12 - v i pp =8a, t p =100ns, any i/o pin to gnd - 14 - dynamic resistance (note 1) r dyn t p =100ns - 0.5 - off state junction capacitance c j 0vdc bias f=1mhz, between any i/o pins to gnd - 0.6 0.8 pf 0vdc bias f=1mhz, between any i/o pins - 0.35 0.4 notes : 1. testing using transmission line pulse (tlp) conditions: z 0 = 50 , t p = 100 ns.
p pje5ufn10a may 8,2014-rev.00 page 3 typical characteristic curves fig.1 typical junction capacitance fi g2 transmission line pulsing (tlp) measurement fig.3 typical peak clamping voltage(8/20 s) fig.4 8/20 s pulse waveform
p pje5ufn10a may 8,2014-rev.00 page 4 part no packing code version mounting pad layout part no packing code package type packing type marking version pje5ufn10a_r1_00001 dfn2510-10l 5k pcs / 7? reel je5u halogen free pje5ufn10a_r2_00001 dfn2510-10l 12k pcs / 13? reel je5u halogen free
p pje5ufn10a may 8,2014-rev.00 page 5 disclaimer reproducing and modifying information of the docum ent is prohibited without permission from panjit international inc.. panjit international inc. reserves the rights to ma ke changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liabilit y arising out of the application or use of any product including damages incidentally and consequentially occurred. panjit international inc. does not assume any and a ll implied warranties, includi ng warranties of fitness for particular purpose, non-infringement and merchantability. applications shown on the herein document are ex amples of standard use and o peration. customers are responsible in comprehending the suitable use in particul ar applications. panjit international inc. makes no representation or warranty t hat such applications will be suitable for the specified use without further testing or modification. the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace mach inery et cetera. customers using or selling these products for use in such applications do so at their ow n risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. since panjit uses lot number as the tracking ba se, please provide the lot number for tracking when complaining.
|
